A Topside company - serving Los Angeles, CA
Topside Attic Insulation Los Angeles insulation team

Attic Insulation in Inglewood - Same-Day Service, Done Right the First Time

✓ Licensed & Insured ⏱ same-day response ✓ Free estimates
Call (628) 226-1097
🛡 Licensed & Insured ⏱ same-day Response 💲 Upfront Pricing · Free Estimates

Insulation in Inglewood, CA

Crawl space encapsulation and vapor barrier work in Inglewood typically runs $3,200-$6,800 for a full encapsulation with dehumidification, while simpler vapor barrier-only jobs start around $1,400-$2,800. Most Inglewood homes we see were built in the 1940s-1960s with vented crawl spaces that trap moisture from the marine layer, making this our most called-about service in the city. If you’re noticing musty odors, sagging floors, or higher-than-expected heating bills, call us at (628) 226-1097 for a free written estimate with upfront pricing.

Call (628) 226-1097

Why Inglewood Homes Are Different

Inglewood sits directly beneath LAX’s primary departure and arrival corridors, making it one of the most aviation-noise-burdened residential communities in the country. The LAWA Residential Sound Insulation Program has subsidized acoustic upgrades for thousands of qualifying homes here, but contractors routinely find these jobs stopped at windows and doors while attic and wall thermal insulation was left untouched. That “half-done” scenario is widespread.

The housing stock is dominated by post-WWII wood-frame bungalows and small ranch-style homes built between the late 1940s and mid-1960s, most constructed with minimal or no wall cavity insulation under era norms. Compact, densely packed lots constrain retrofit access, pushing us toward blown-in or injection foam methods rather than open-wall batt installation. Inglewood’s persistent marine layer and cooler baseline temperatures than most of LA County have historically reduced the perceived urgency of thermal upgrades, leaving older homes chronically under-insulated. That same coastal humidity means any new attic or wall work must account for vapor diffusion to prevent moisture accumulation in materials that have never been properly air-sealed.

Our Main Inglewood Services

Most Inglewood homeowners who call us start with attic work or spray foam. Here is what those jobs look like here.

Attic Insulation in Inglewood

Attic insulation in Inglewood means addressing decades of minimal or degraded material in 1940s-1960s roof assemblies, often compounded by the LAWA sound program’s window upgrades that left thermal gaps above the ceiling plane. We begin with a blower-door test to establish baseline leakage, then seal before insulating. Attic Insulation in Inglewood covers our full process, material options from Owens Corning and Johns Manville, and documented photo records of every job.

Attic Insulation in Inglewood

Spray Foam Insulation in Inglewood

Spray foam insulation in Inglewood works well in the tight access conditions common to the city’s older neighborhoods, where compact lots limit demolition options. Closed-cell foam adds structural rigidity and vapor control in one pass, particularly valuable given the coastal humidity. Spray Foam Insulation in Inglewood details our material sourcing from Demilec and Icynene, our written-price protocol, and before-and-after blower-door documentation.

Spray Foam Insulation in Inglewood

Blown-In Insulation in Inglewood

Blown-in insulation in Inglewood is often the practical choice for retrofitting walls and attics in post-war bungalows without opening finished surfaces. Dense-pack cellulose from GreenFiber or fiberglass from Knauf can achieve proper R-value in cavities never originally insulated. Blown-In Insulation in Inglewood explains our installation methods, air-sealing prerequisites, and how we document the work.

Blown-In Insulation in Inglewood
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (628) 226-1097

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.
BeforeBefore
AfterAfter

Crawl Space Encapsulation & Vapor Barrier in Inglewood

Technician performing professional crawl space encapsulation and vapor barrier installation
Crawl Space Encapsulation & Vapor Barrier in Inglewood

Inglewood’s 1940s-1960s housing stock was built with vented crawl spaces that perform poorly against the persistent marine layer moisture rolling in from Santa Monica Bay. We regularly find dirt-floored crawl spaces with no vapor barrier, where relative humidity stays above 70% year-round and floor joists show early-stage fungal growth. Crawl Space Encapsulation & Vapor Barrier is our primary service here because the combination of old construction, coastal humidity, and rising energy costs creates a clear payback for homeowners willing to treat the space as part of the conditioned building envelope.

Crawl Space Vapor Barrier

Signs you need it

Your crawl space has exposed dirt, visible moisture on the ground or joists, or a persistent musty smell that enters the living space through floor gaps.

What it costs in Inglewood

Most vapor barrier installations in Inglewood run $1,400-$2,800 for a standard 1,200-square-foot crawl space with 6-mil polyethylene and sealed seams.

How we do it

We remove debris, grade the soil, lay overlapping polyethylene sheets with sealed seams and perimeter attachment to foundation walls, then tape all penetrations before documenting with photos.

Crawl Space Encapsulation

Signs you need it

You’re seeing sagging floors, insulation falling from joists due to moisture weight, or your HVAC ducts in the crawl space are sweating and losing efficiency.

What it costs in Inglewood

Full encapsulation with closed-cell foam on walls, sealed vapor barrier, and dehumidification typically ranges $3,200-$6,800 in Inglewood’s compact crawl spaces.

How we do it

We seal all vents, apply closed-cell foam to foundation walls, install a continuous vapor barrier sealed to walls and piers, add a condensate-pumped dehumidifier, and provide before-and-after moisture readings with photo documentation.

What Crawl Space Encapsulation & Vapor Barrier Costs in Inglewood

Item Typical range in Inglewood
Vapor barrier (6-mil poly, standard crawl space) $1,400-$2,800
Full encapsulation with closed-cell foam $3,200-$6,800
Dehumidifier installation (add-on) $800-$1,400

Does encapsulation help with Inglewood’s coastal humidity?

Yes. Sealing the crawl space from outside air and adding a dehumidifier controls moisture far better than ventilation in marine-layer conditions. Call (628) 226-1097 for a free written estimate.

Will encapsulation affect my home’s energy bills?

Most Inglewood homeowners see 10-20% heating and cooling reduction after full encapsulation, since conditioned air stops leaking into the crawl space and ductwork operates in stable conditions. Call (628) 226-1097 for a free written estimate.

Radiant Barrier Installation in Inglewood

Technician installing crawl space insulation and vapor barrier vapor sheeting
Radiant Barrier Installation in Inglewood

Inglewood’s mild coastal climate means radiant barrier installation is less about extreme heat gain than about consistent, year-round performance improvement in poorly ventilated 1950s attics. We often find ranch-style homes with dark asphalt shingle roofs and minimal attic ventilation where summer afternoon temperatures spike the ceiling plane despite the marine layer’s morning presence. Radiant Barrier Installation gives homeowners a measurable way to reduce that radiant heat transfer without the disruption of full insulation replacement.

Attic Radiant Barrier

Signs you need it

Your attic exceeds 130°F on sunny afternoons, upstairs rooms stay uncomfortably warm into the evening, or your AC runs continuously without reaching setpoint.

What it costs in Inglewood

Attic radiant barrier installation in Inglewood typically runs $1,200-$2,400 for a standard 1,500-square-foot roof deck with foil-faced material.

How we do it

We staple perforated radiant barrier foil to the underside of roof rafters, maintaining ventilation channels, then verify surface temperature reduction with an infrared thermometer and document readings.

Radiant Barrier & Ventilation

Signs you need it

Your attic has no ridge vent, blocked soffit vents, or visible moisture staining that suggests radiant barrier alone won’t solve the problem.

What it costs in Inglewood

Combined radiant barrier with added ventilation in Inglewood runs $2,000-$3,800 depending on roof configuration and soffit accessibility.

How we do it

We install baffles at soffits, add or clear ridge venting, then apply radiant barrier foil and measure attic temperature differential before and after with documented photos.

What Radiant Barrier Installation Costs in Inglewood

Item Typical range in Inglewood
Attic radiant barrier (foil to rafters) $1,200-$2,400
Radiant barrier with ventilation upgrade $2,000-$3,800
Radiant barrier roof deck (new construction or reroof) $1,800-$3,200

Does radiant barrier work in Inglewood’s cooler climate?

Yes, particularly on dark shingle roofs with poor ventilation where attic temperatures still spike 40-50°F above ambient on sunny days. Call (628) 226-1097 for a free written estimate.

Can radiant barrier be combined with existing insulation?

Absolutely. We install radiant barrier as a complementary layer after air sealing and assess whether additional insulation is needed for full performance. Call (628) 226-1097 for a free written estimate.

Get the price in writing before anything starts.Serving Inglewood - a real person answers, day or night.
Call now

Insulation Removal & Replacement in Inglewood

Professional contractor installing fiberglass attic insulation for energy efficiency
Insulation Removal & Replacement in Inglewood

Inglewood’s post-war housing stock contains decades of degraded, contaminated, or improperly installed insulation that homeowners discover during remodeling or after pest activity. We regularly remove material that was blown over unsealed attic floors in the 1970s-1990s, creating a compressed, dirty layer that traps moisture against the ceiling plane. Insulation Removal & Replacement starts with a written scope and hazardous material assessment, then delivers documented photo evidence of the cavity condition before new material goes in.

Attic Insulation Removal

Signs you need it

Your attic insulation is compressed below its original R-value, shows water staining, or has been disturbed by prior work without proper restoration.

What it costs in Inglewood

Attic insulation removal in Inglewood typically runs $1,600-$3,200 for a standard home, depending on material type and accessibility constraints in compact lots.

How we do it

We set up negative air containment, remove material with HEPA-filtered vacuums, bag and dispose per local requirements, then photo-document the bare deck before any replacement or sealing work begins.

Contaminated Insulation Removal

Signs you need it

You’re finding rodent droppings, urine staining, or fungal growth in attic or crawl space insulation that poses health risks and degrades air quality.

What it costs in Inglewood

Contaminated insulation removal with full decontamination in Inglewood ranges $2,400-$4,800, including PPE, HEPA filtration, and antimicrobial treatment of surfaces.

How we do it

We suit in full PPE, establish negative pressure, remove contaminated material, apply enzyme-based sanitizer to all surfaces, verify with ATP testing, and provide photo documentation before replacement.

What Insulation Removal & Replacement Costs in Inglewood

Item Typical range in Inglewood
Attic insulation removal $1,600-$3,200
Contaminated insulation removal $2,400-$4,800
Insulation replacement (after removal) $2,000-$4,500

Do I need to leave my home during removal?

For standard removal, no. For contaminated material with active fungal or heavy rodent contamination, we recommend vacating for 24 hours during treatment and initial air scrubbing. Call (628) 226-1097 for a free written estimate.

How long does removal and replacement take?

Most Inglewood jobs complete in 1-2 days for removal, with replacement adding another day depending on air sealing needs and material choice. Call (628) 226-1097 for a free written estimate.

Attic Air Sealing in Inglewood

Professional cutting pink fiberglass attic insulation batts with a utility knife.
Attic Air Sealing in Inglewood

Attic air sealing in Inglewood addresses the single largest source of conditioned air loss in 1940s-1960s homes: the ceiling plane riddled with unsealed top plates, electrical penetrations, and original can lights. The marine layer’s humidity makes these leaks especially costly, as warm moist air escapes upward in winter and hot attic air infiltrates downward in summer, carrying moisture that condenses on cool surfaces. Attic Air Sealing is always our first step before adding insulation, and we publish before-and-after blower-door numbers so homeowners see the exact CFM50 reduction they paid for.

Top Plate & Penetration Sealing

Signs you need it

Your blower-door test shows excessive leakage at the ceiling plane, or you feel drafts at outlets and switches on exterior walls during windy conditions.

What it costs in Inglewood

Top plate and penetration sealing in Inglewood typically runs $1,200-$2,400 for a standard post-war bungalow with accessible attic space.

How we do it

We locate all top plate gaps with smoke pencils, seal with fire-rated caulk and expanding foam, address wire and pipe penetrations, then re-test with the blower door and document the CFM50 reduction.

Can Light & Duct Boot Sealing

Signs you need it

You have original non-IC can lights in ceilings below the attic, or visible gaps around HVAC duct boots where conditioned air escapes directly into the attic.

What it costs in Inglewood

Can light sealing with approved covers and duct boot sealing in Inglewood ranges $800-$1,800 depending on quantity and accessibility in tight attics.

How we do it

We install fire-rated airtight covers over non-IC cans, seal with mastic at duct boots, verify with blower-door zone testing, and photo-document each sealed penetration.

What Attic Air Sealing Costs in Inglewood

Item Typical range in Inglewood
Top plate and penetration sealing $1,200-$2,400
Can light and duct boot sealing $800-$1,800
Full attic air sealing (comprehensive) $2,200-$4,200

Can air sealing alone reduce my energy bills?

Yes. Most Inglewood homes see 15-25% reduction in heating and cooling costs after comprehensive attic air sealing, before any insulation is added. Call (628) 226-1097 for a free written estimate.

How do you prove the sealing worked?

We provide before-and-after blower-door test results in CFM50, a single number showing exactly how much less air your home leaks after our work. Call (628) 226-1097 for a free written estimate.

Wall Insulation in Inglewood

Professional technician installing blown-in attic insulation
Wall Insulation in Inglewood

Wall insulation in Inglewood means retrofitting 1940s-1960s wood-frame homes built with empty stud cavities under the era’s minimal code requirements. Compact lot lines and attached garages common in neighborhoods near Century Boulevard and Crenshaw make exterior access difficult, so we rely on injection and drill-and-fill methods that preserve finished interiors. Wall Insulation also addresses the acoustic needs unique to Inglewood’s LAX flight path, where homeowners who received LAWA window upgrades still hear every departure through uninsulated walls.

Injection Foam Wall Insulation

Signs you need it

Your exterior walls feel cold to the touch in winter, you hear aircraft noise clearly through closed windows, or an infrared scan shows voids in wall cavities.

What it costs in Inglewood

Injection foam wall insulation in Inglewood runs $3,500-$6,500 for a typical 1,200-square-foot home, with acoustic-dense formulations at the higher end.

How we do it

We drill 5/8-inch holes at stud spacing, inject slow-rise foam to fill cavities completely, patch with matching texture, and verify fill with thermal imaging from the interior.

Interior Wall Soundproofing

Signs you need it

You’ve completed LAWA sound insulation but still hear aircraft noise through walls, or you need party-wall treatment in duplexes common near downtown Inglewood.

What it costs in Inglewood

Interior wall soundproofing with mineral wool and resilient channel in Inglewood ranges $4,200-$7,800 per room depending on wall area and existing finish removal.

How we do it

We remove drywall, install Rockwool Safe’n’Sound between studs, add resilient channel to decouple the finish layer, reinstall drywall, and test with a sound level meter before and after.

What Wall Insulation Costs in Inglewood

Item Typical range in Inglewood
Injection foam wall insulation $3,500-$6,500
Drill and fill (cellulose) $2,800-$5,200
Interior wall soundproofing $4,200-$7,800

Will wall insulation help with LAX noise?

Yes, particularly dense-pack cellulose or mineral wool, which add mass and damping that reduce airborne sound transmission by 8-12 decibels. Call (628) 226-1097 for a free written estimate.

Do you need to remove interior drywall?

For injection foam, no. For full acoustic treatment with resilient channel, yes. We discuss both options and provide written prices for each before any work starts. Call (628) 226-1097 for a free written estimate.

Attic Cleaning & Rodent Proofing in Inglewood

Technician installing white vapor barrier liner in residential crawl space
Attic Cleaning & Rodent Proofing in Inglewood

Attic cleaning and rodent proofing in Inglewood addresses a persistent problem in the city’s mature neighborhoods: older homes with multiple roof penetrations, deteriorated fascia, and tree canopy that provides highway access for rats and squirrels. The LAWA sound program’s focus on windows and doors left attic vulnerabilities unaddressed, and we regularly find compromised insulation, contaminated storage, and gnawed wiring in 1950s-era bungalows. Attic Cleaning & Rodent Proofing restores the space to usable condition and prevents re-entry with materials and methods that last.

Attic Sanitizing & Decontamination

Signs you need it

Your attic smells of urine or decay, shows visible droppings, or has insulation compressed and stained by rodent activity.

What it costs in Inglewood

Attic sanitizing and decontamination in Inglewood typically runs $1,800-$3,600 including removal of contaminated material, enzyme treatment, and HEPA air scrubbing.

How we do it

We remove all contaminated insulation and debris, apply enzyme-based sanitizer to kill pathogens and odor, run HEPA filtration for 24 hours, verify with ATP testing, and document with before-and-after photos.

Rodent Proofing & Exclusion

Signs you need it

You’re hearing scratching at night, finding new droppings after prior trapping, or seeing gnaw marks at roof junctions and vent screens.

What it costs in Inglewood

Rodent proofing and exclusion in Inglewood ranges $1,400-$2,800 for a standard home, including all entry point sealing and one-year warranty on re-entry.

How we do it

We inspect with motion-activated cameras if needed, seal all entry points larger than 1/4 inch with rodent-proof materials, install vent guards, and provide a written exclusion map with photo documentation.

What Attic Cleaning & Rodent Proofing Costs in Inglewood

Item Typical range in Inglewood
Attic sanitizing and decontamination $1,800-$3,600
Rodent proofing and exclusion $1,400-$2,800
Full attic restoration (cleaning + proofing + reinsulation) $4,200-$8,500

How do you find all entry points?

We inspect roofline, soffits, vents, and utility penetrations with ladders and borescope cameras; in complex cases we set motion cameras to confirm active paths. Call (628) 226-1097 for a free written estimate.

Is the sanitizing safe for my family?

We use enzyme-based, non-toxic sanitizers that break down organic matter without residual chemicals; we recommend 4-hour ventilation after treatment. Call (628) 226-1097 for a free written estimate.

Home Energy Audit in Inglewood

Professional applying spray foam insulation to ceiling between wooden beams
Home Energy Audit in Inglewood

A home energy audit in Inglewood reveals why 1940s-1960s homes underperform despite mild temperatures: air leakage dominates thermal loss, and the marine layer’s humidity masks comfort problems that show up as mold risk and high bills. We regularly find homes where the LAWA sound program improved windows but left attic and wall thermal bridges intact, creating a performance gap no homeowner can see without diagnostic equipment. Home Energy Audit provides the documented baseline, prioritized scope, and written price that every subsequent decision depends on.

Blower Door Test

Signs you need it

Your home feels drafty despite closed windows, your energy bills are higher than comparable neighbors, or you’re planning insulation work and want proof of improvement.

What it costs in Inglewood

A standalone blower-door test in Inglewood runs $350-$550, or it’s included at no additional charge when bundled with a full energy audit.

How we do it

We install a calibrated fan in an exterior door, depressurize the house to 50 Pascals, measure CFM50 leakage, then use smoke pencils and infrared cameras to locate and document each major leak path.

Thermal Imaging Inspection

Signs you need it

You have cold spots on walls or ceilings, suspect missing insulation in finished areas, or need to verify contractor work after completion.

What it costs in Inglewood

Thermal imaging inspection in Inglewood ranges $400-$650 as a standalone service, or combined with blower-door testing for $600-$900 total.

How we do it

We scan all building surfaces with a FLIR camera during controlled temperature differential conditions, mark thermal anomalies on photos, and deliver a report with prioritized repair recommendations and written pricing.

What Home Energy Audit Costs in Inglewood

Item Typical range in Inglewood
Blower-door test (standalone) $350-$550
Thermal imaging inspection $400-$650
Full home energy audit (combined) $600-$900

Will an audit tell me what to fix first?

Yes. Our report ranks recommendations by cost-effectiveness and comfort impact, with written prices for each phase so you can budget sequentially. Call (628) 226-1097 for a free written estimate.

Do I need an audit before insulation work?

We require a blower-door baseline before any air sealing or insulation job so we can publish your verified improvement; the audit fee applies toward the work. Call (628) 226-1097 for a free written estimate.

Brands We Service in Inglewood

Technician in protective suit using professional spray foam insulation equipment
Brands We Service in Inglewood

We source insulation materials from Owens Corning, Johns Manville, Knauf, and GreenFiber, with no proprietary lock-in that limits your options. Our Los Angeles office stocks common batt, blown, and foam formulations for Inglewood jobs, and we can specify alternate brands when a project’s performance requirements or your preference calls for them. our brands page lists full specifications and availability.

Pricing for Insulation in Inglewood, CA

Service Typical range in Inglewood
Crawl space vapor barrier $1,400-$2,800
Crawl space encapsulation (full) $3,200-$6,800
Attic radiant barrier $1,200-$2,400
Radiant barrier with ventilation $2,000-$3,800
Attic insulation removal $1,600-$3,200
Contaminated insulation removal $2,400-$4,800
Top plate and penetration sealing $1,200-$2,400
Full attic air sealing $2,200-$4,200
Injection foam wall insulation $3,500-$6,500
Interior wall soundproofing $4,200-$7,800
Attic sanitizing and decontamination $1,800-$3,600
Rodent proofing and exclusion $1,400-$2,800

Prices in Inglewood trend toward the higher end of these ranges when crawl spaces are exceptionally tight, when acoustic performance requirements exceed standard thermal specs, or when homes have had prior work that must be removed before proper treatment. Every job begins with a written price before any work starts, under Haven Standard Clause 1, and we provide free second opinions on any competing written estimate.

Neighborhoods We Serve in Inglewood

Professional contractor applying spray foam insulation between wooden floor joists
Neighborhoods We Serve in Inglewood

Our crews work throughout Inglewood’s residential core, from the older bungalows near La Brea and Florence to the ranch-style homes in Morningside Park and the duplexes near downtown. Dispatch and scheduling are coordinated from our Los Angeles office, with typical response time of same-day or next-day for estimates.

  • Morningside Park
  • Century Heights
  • Lockhaven
  • Inglewood Knolls
  • Crenshaw-Imperial

Service Area - Cities Near Inglewood

We serve Inglewood homeowners directly and travel regularly to neighboring communities for building envelope work. If you’re near the city line, we also work in Hawthorne, CA, Culver City, CA, Lawndale, CA, and Manhattan Beach, CA. Every job uses the same Haven Standard protocol: written price first, documented record last, with before-and-after blower-door numbers on applicable work.

Serving Inglewood, CA - Our Local Coverage Area

We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs About Insulation in Inglewood

Ready to get started? Free estimates · same-day response in Inglewood
Call (628) 226-1097

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local insulation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically same-day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Inglewood Customers Say

★★★★★ 4.7 from 7+ reviews

"The winter gas bill dropped by about a third. They had estimated a quarter, so they under-promised."

- Genevieve R.

"Fixed price, clean work, and they hauled the old material away as agreed."

- Todd M.

"Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."

- Ainsley P.

How It Works in Inglewood

Getting your insulation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your insulation needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Inglewood - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Inglewood - we'll get back to you fast. No obligation.

By reaching out through this form, you acknowledge our Privacy Policy and agree to be contacted by phone, email, or text about your service request, including from the local pros who may handle it.

Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch