GreenFiber Home Energy Audit Nationwide

GreenFiber Home Energy Audit in Los Angeles: What to Know First

We provide independent GreenFiber home energy audit in Los Angeles, typically scheduling within 48 hours and completing most diagnostic visits the same day. A full blower-door test, thermal imaging scan, and insulation condition report runs $280-$450 for a standard single-family home, and we deliver a written price for any recommended work before you decide. This page is for GreenFiber owners in Los Angeles who want to know why their cellulose insulation isn’t performing as expected, whether the original installation left air leaks unsealed, and what the fix actually costs. Call (628) 226-1097 or text us to book.

Call (628) 226-1097

How GreenFiber Products Fail - and How We Fix Them

• Sanctuary loose-fill cellulose settling below labeled R-value in vented attics. GreenFiber’s all-borate-treated cellulose settles 15-20 percent over the first two winters, which is normal, but Los Angeles temperature swings - 45°F nights followed by 85°F Santa Ana afternoons - accelerate thermal cycling and compaction in homes near Griffith Park or the Hollywood Hills. We measure actual depth with a ruled probe, calculate the installed R-value against GreenFiber’s published coverage chart, and only then specify additional blow or dense-pack remediation.
• Insulate and Seal two-in-one product separating at top plates and electrical penetrations. GreenFiber’s adhesive-enhanced blend is designed to cling in wall cavities, but in older Los Angeles stucco homes with balloon framing, the material often bridges across gaps rather than filling them, creating hidden bypasses. We pull back the settled material, seal the top plates with fire-rated caulk or gasketed covers, then reinstall - never blow new product over unsealed leaks.
• Cocoon stabilized cellulose losing bond in high-moisture crawl spaces. The acrylic binder in Cocoon breaks down where groundwater vapor exceeds 70 percent relative humidity, common in Mid-Century ranch homes with original foundation vents in Mar Vista or Del Rey. We find the moisture source first, install or repair vapor barriers, then replace the degraded material with a product suited to the actual condition - sometimes Cocoon again, sometimes not.
• Legacy GreenFiber batts compressed by homeowner storage or contractor traffic. Pre-2015 batts in Los Angeles attic floors often sit beneath plywood walking boards or stored holiday bins; compressed cellulose loses up to half its R-value. We photo-document the compression pattern, remove and re-fluff where possible, or specify new loose-fill to achieve the target R-38 per Title 24.
• GreenFiber installed over unsealed recessed can lights and duct boots. This is the failure we see most: a previous contractor blew Sanctuary directly over non-IC-rated cans or flex-duct penetrations, creating both a fire hazard and a thermal bypass. We cut back the insulation, install fire-rated enclosures or ten-mastic-sealed collars, then replace the GreenFiber - seal the holes first, then measure the R-value. In that order.

Our GreenFiber Home Energy Audit Process

1. 1
   Schedule and scope. You call or text (628) 226-1097; a live person answers. We confirm square footage, year built, and any known comfort complaints - hot second-floor bedrooms in August, high summer electric bills, dust from attic hatches.
2. 2
   Blower-door test on arrival. We run a pressurization diagnostic - a calibrated fan in a temporary door panel that measures CFM50, the cubic feet of air leaking per minute at 50 pascals of pressure. This gives us one number that sums every hole in the envelope.
3. 3
   Thermal imaging and physical inspection. Our FLIR camera finds the gaps the blower door confirmed: missing top-plate seals, unblocked soffit chases, duct leakage into vented attics. We probe GreenFiber depth at ten locations and check for moisture staining or rodent disturbance.
4. 4
   Written findings and price. Before we leave, you get a written report with the blower-door number, thermal images, GreenFiber condition assessment, and a flat price for any recommended air sealing, insulation repair, or replacement. No work starts without it - Haven Standard Clause 1.
5. 5
   Execution and verification. If you proceed, we seal first, then insulate. On applicable jobs we run the blower door again and publish the before-and-after numbers so you can verify the result. Every job closes with a Documented Photo Record and the 365-Day Done Right Promise.

Before

After

What GreenFiber Home Energy Audit Costs in Los Angeles

Most Los Angeles homes built 1950-1990 with original GreenFiber or early-2000s retrofits fall in the middle of these ranges. We also service Reflectix radiant barrier systems where those were layered over or under GreenFiber. Bring us any written estimate and we’ll review it with you - free second opinion, no obligation. Call (628) 226-1097 for an exact quote; estimates are free.

Why Los Angeles Homeowners Call Topside Attic Insulation Los Angeles for GreenFiber Work

We’re an independent GreenFiber service provider - not affiliated with or authorized by the manufacturer - which means we specify what the house actually needs, not what a product line demands. Since 2016 under The Haven Standard, we’ve sealed and insulated 9,000+ homes, every one with a written price first and a documented record at close. Wes Okafor, our owner and lead technician, learned the trade at Richard J. Daley College’s HVAC and building science programs and has run blower-door tests for over two decades; his crew knows the specific failure patterns of GreenFiber in Los Angeles’s mixed-dry climate, from Santa Monica’s marine layer to Pasadena’s heat islands. Background-checked, uniformed technicians. Live person answers 24/7. Before-and-after blower-door numbers on every applicable job. The 365-Day Done Right Promise applies to all work.

FAQs